RadiForce LX470W | EIZO

    • LX470W
    • Compare
  • RadiForce LX470W
  • RadiForce LX470W
  • expand
  • RadiForce LX470W


This 2 MP widescreen monitor is ideally suited for viewing DICOM X-ray images or serving as a repeater monitor in surgical environments. A wide range of input and output signals, the combining of pictures, and pre-calibrated gamma models permit tailoring the monitor to multiple specialties. The fanless design and the waterproof, easy-to-clean front panel enable usage in sterile hospital environments.
  • Contact EIZO
2 items

  • Features
  • Specifications
  • Documents
  • QC Software & Tools Accessories

Wide Viewing Angles for Multiple People Use

Thanks to the wide viewing angles, images can be viewed simultaneously by several people with the highest quality reproduction and minimal color shift.

Diagnostic Precision with Factory Adjustment

To ensure the most accurate and consistent shadings possible, EIZO carefully measures and sets every grayscale tone on the production line to offer monitors fully compliant with DICOM Part 14.

Full High-Definition

With a native resolution of 1920 x 1080, the monitor can display original, full HD images in 1920 x 1080 resolution without blurring or distortion.

Full High-Definition


Dual Picture Viewing Modes

With Picture-in-Picture (PiP), Picture-and-Picture (PaP), and Picture-on-Picture (PoP) functions, different data sources, e.g. archived images or patient data can be reviewed simultaneously during an operation.

Fanless Silent Design

Engineered to dissipate heat without a fan, thus keeping distracting noises and circulation of dust and germs out of the operating room while ensuring the controlled laminar airflow remains undisturbed within the room.

Arm Mountable VESA Compliance

VESA compliance to be attached to existing mounting accessories.

Customer Assurance with Medical Standards

RadiForce monitors meet the strictest medical, safety, and EMC emission standards.

Quick Brightness Stabilization for Instant Viewing

EIZO's fully automated stability function makes use of an internal backlight sensor to quickly stabilize the brightness level at startup and to compensate for fluctuations caused by variations in ambient temperature and the passage of time.

Consistency with DICOM Part 14 Calibration

RadiForce monitors are calibrated to comply with DICOM Part 14 to offer rendering consistency over time.

Consistency with DICOM Part 14 Calibration

Colors to Fit the Physician's Preference

The color, hue, saturation, brightness, contrast, temperature and tones of the display can be adjusted to best fit the physician's color preference.

Colors to Fit the Physician's Preference

Wide Range of Input and Output Support

EIZO offers multiple input signals to allow connections with both legacy and state-of-the-art endoscopic systems without the need of other optional devices or costs. With loop-through output support, the monitors are also ideally suited for multi-monitor integration or archiving in the operating room.

LCD Panel Protector for Easy Cleaning

The panel protector secures the screens from scratches, damages and liquids and alleviates cleaning and disinfection of the front surface.



Cabinet Color Black, White
Type Color (IPS)
Backlight CCFL
Size 119 cm / 47"
Native Resolution 1920 x 1080 (16:9 aspect ratio)
Viewable Image Size (H x V) 1039.7 x 584.8 mm
Pixel Pitch 0.5415 x 0.5415 mm
Display Colors 8-bit colors: 16.77 million colors
Viewing Angles (H / V, typical) 178° / 178°
Brightness (typical) 700 cd/m2
Contrast Ratio (typical) 1000:1
Response Time (typical) 9 ms (midtone)
Video Signals  
Input Terminals BNC (HD-SDI) x 1, BNC (Composite) x 1, DVI-I x 1, HDMI x 1, D-Sub mini 15 pin (Separate Sync, Composite Sync, SoG*,YPbPr*, RGBS*, RGB/HV*) x 1, S-Video x 1
*Require use of D-Sub mini 15 pin to (up to 5) BNC adapter cable.
Output Terminals BNC (HD-SDI, Composite) x 2, D-Sub mini 15 pin (VGA) x 1, S-Video x 1
(All outputs: loop through)
Digital Scanning Frequency (H / V) 15 - 100 kHz / 50 - 85 Hz
Analog Scanning Frequency (H / V) 15 - 100 kHz / 50 - 85 Hz
Function 1 upstream, 2 downstream
Standard USB 2.0
Power Requirements AC 100 - 240 V: 50 / 60 Hz
Maximum Power Consumption 270 W
Power Save Mode Less than 14W
Power Management Digital: DVI DMPM,
Analog: VESA DPM
Sensor Backlight Sensor
Features & Functions  
OSD Languages English, German
Physical Specifications  
Net Weight -
Net Weight (Without Stand) 40 kg
Hole Spacing (VESA Standard) 400 x 200 mm, M8, depth 10 - 12 mm
Environmental Requirements  
Degree of Protection IP54 (Front)
IP20 (Rear)
Certifications & Standards (Please contact EIZO for the latest information.) CE (Medical Device Directive), IEC/EN60601-1 (2nd edition), IEC/EN60601-1 (3rd edition), CAN/CSA C22.2 No. 601.1-M90, CAN/CSA C22.2 No. 60601-1-08, UL60601-1, FCC-A, C-tick, RCM (from March 1st 2016 latest), RoHS, China RoHS, WEEE, CCC
Supplied Accessories (May vary by country. Please contact EIZO for details.) AC power cord, signal cable (DVI-D - DVI-D), remote control, Utility Disk (PDF Instructions for Use)
Dimension Drawing GIF


RadiForce L&E-Series
11.7 MB



QC Software & Tools

- Quality Control Software

QC Software & Tools
UX1 Sensor

- Quality Control Tool
- External Sensor


- Desktop stand for surgical monitor

Monitor Cleaning Kit

- Keep your screen free from dust and fingerprints
- Includes pump spray and cloth

Mounting Bracket

- Wall mount for large size monitors

  • EIZO Medical Multi-Modality Monitors
  • EIZO Digital Mammography Monitors in the Field
  • EIZO Medical QC Solutions
  • EIZO Multi-Modality Mammography Monitors -The One Screen Solutions
  • EIZO Medical Multi-Modality Monitors
  • EIZO Digital Mammography Monitors in the Field
  • EIZO Medical QC Solutions
  • EIZO Multi-Modality Mammography Monitors -The One Screen Solutions
prev next