RadiForce LX600W | EIZO
- Quality Control
- Graphics Boards
- QC Software & Tools Accessories
Everything in a Single Glance
Large widescreen monitors with high resolution can be used instead of single 1 Megapixel monitors in ceiling suspensions. Compared with multi-monitor scenarios, these large screen monitors have no regional color differences or obtrusive bezels, thus reducing eye fatigue and the potential for distraction.
Quick Brightness Stabilization for Instant Viewing
EIZO's fully automated stability function makes use of an internal backlight sensor to quickly stabilize the brightness level at startup and to compensate for fluctuations caused by variations in ambient temperature and the passage of time.
Consistency with DICOM Part 14 Calibration
RadiForce monitors are calibrated to comply with DICOM Part 14 to offer rendering consistency over time.
Environmentally-Friendly LED Backlight
By utilizing an energy-efficient LED as a backlight, the monitor achieves a high-brightness and low power consumption at the same time. Unlike conventional CCFL backlights, LED backlights deteriorate more slowly and thus the monitor offers a longer service life. Since the LED backlight is mercury free, it will reduce any potential impact on the environment when it is disposed of.
LCD Panel Protector for Easy Cleaning
The panel protector secures the screens from scratches, damages and liquids and alleviates cleaning and disinfection of the front surface.
Customer Assurance with Medical Standards
RadiForce monitors meet the strictest medical, safety, and EMC emission standards.
Brightness Uniformity for a Steadier Image Across the Screen
The Digital Uniformity Equalizer (DUE) function provides optimum backlight luminance uniformity which is considered difficult to attain due to the characteristics of LCD monitors, especially with larger screen sizes.
Wide Viewing Angles for Multiple People Use
Thanks to the wide viewing angles, images can be viewed simultaneously by several people with the highest quality reproduction and minimal color shift.
Diagnostic Precision with Factory Adjustment
To ensure the most accurate and consistent shadings possible, EIZO carefully measures and sets every grayscale tone on the production line to offer monitors fully compliant with DICOM Part 14.
Work Safely with Minimal Picture Delay
With images displayed on the screen in real time, time critical aspects of image distribution are addressed to ensure e.g. safe catheter localization during insertion into an artery.
Operational Reliability Through Redundant Components
With its redundant components architecture (2 power supplies, 2 backlights, 2 transmission links), EIZO ensures a high degree of operational reliability for fail-safe environments. A monitoring function can be configured to notify the X-ray system if e.g. operating conditions become critical or a component fails.
Arm Mountable VESA Compliance
VESA compliance to be attached to existing mounting accessories.
LX600W: Without Panel Protector
LX600WP: With Panel Protector
|Size||153 cm / 60.1"|
|Native Resolution||3840 x 2160 (16:9 aspect ratio)|
|Viewable Image Size (H x V)||1330.0 x 748.0 mm|
|Pixel Pitch||0.3465 x 0.3465 mm|
|Display Colors||8-bit colors: 16.77 million colors|
|Viewing Angles (H / V, typical)||176° / 176°|
|Brightness (typical)||520 cd/m2|
|Recommended Brightness for Calibration||300 cd/m2|
|Contrast Ratio (typical)||4000:1|
|Response Time (typical)||6 ms (midtone)|
|Input Terminals||DVI-D (dual link) x 2|
|Digital Scanning Frequency (H / V)||124 - 131.4 kHz / 59.7 - 60.3 Hz|
|Power Requirements||AC 100 - 240 V: 50 / 60 Hz|
|Maximum Power Consumption||500 W|
|Power Save Mode||Less than 41 W|
|Power Management||DVI DMPM|
|Sensor||Backlight Sensor x 2|
|Net Weight (Without Stand)||
LX600W: 55 kg
LX600WP: 65 kg
|Hole Spacing (VESA Standard)||400 x 400 mm, M8, depth 16 - 20 mm|
|Degree of Protection||IP20|
|Certifications & Standards (Please contact EIZO for the latest information.)||CE (Medical Device Directive), IEC/EN60601-1 (2nd edition), IEC/EN60601-1 (3rd edition), CAN/CSA C22.2 No. 601.1-M90, CAN/CSA C22.2 No. 60601-1-08, UL60601-1, FCC-B, C-tick, RCM (from March 1st 2016 latest), RoHS, China RoHS, WEEE, CCC|
|Supplied Accessories (May vary by country. Please contact EIZO for details.)||AC power cord, dual link signal cable (DVI-D - DVI-D) x 2, Utility Disk (PDF Instructions for Use)|
- Quality Control Tool
- External Sensor
- Desktop stand for surgical monitor
- Keep your screen free from dust and fingerprints
- Includes pump spray and cloth
- Wall mount for large size monitors