RadiForce LX300W | EIZO ****Discontinued****
- Graphics Boards
- QC Software & Tools Accessories
Everything in a Single Glance
Large widescreen monitors with high resolution can be used instead of single 1 Megapixel monitors in ceiling suspensions. Compared with multi-monitor scenarios, these large screen monitors have no regional color differences or obtrusive bezels, thus reducing eye fatigue and the potential for distraction.
Special fail-safe mode through DVI input for emergency information from the system for a certain timing. As soon as the timing is active, the information will be shown immediately on the upper left screen side.
View Accurate Images in Moments
EIZO’s fully automated stability function makes use of an internal backlight sensor to quickly stabilize the brightness level at startup and to compensate for fluctuations caused by variations in ambient temperature and the passage of time.
Wide Viewing Angles for Multiple People Use
Thanks to the wide viewing angles, images can be viewed simultaneously by several people with the highest quality reproduction and minimal color shift.
Flexible Operation Modes
Up to three input signals can be displayed simultaneously. The images can be arranged side by side or as Picture in Picture (PiP), while image rotation is managed by the monitor.
The communication interface is routed via the DVI or USB connection. The operating states of the monitor can be read and switched via the interface, e.g. in Power Safe Mode. In particular, the monitor functionality can be queried using the interface.
To ensure the most accurate and consistent shadings possible, EIZO carefully measures and sets every grayscale tone on the production line to offer monitors fully compliant with DICOM Part 14.
Maintain the Precision
Monitor calibration can be carried out to maintain DICOM Part 14 compliance for rendering consistency over time.
Attain Steady Images Across the Screen
The Digital Uniformity Equalizer (DUE) function provides optimum backlight luminance uniformity which is considered difficult to attain due to the characteristics of LCD monitors, especially with larger screen sizes.
Environmentally-Friendly LED Backlight
By utilizing an energy-efficient LED as a backlight, the monitor achieves a high-brightness and low power consumption at the same time. Unlike conventional CCFL backlights, LED backlights deteriorate more slowly and thus the monitor offers a longer service life. Since the LED backlight is mercury free, it will reduce any potential impact on the environment when it is disposed of.
The monitor features intelligent cooling concept by measuring and controlling the inside temperature. A mode without fan cooling is selectable so the controlled laminar airflow will be undisturbed within the room as far as possible.
LCD Panel Protector for Easy Cleaning
A monitor model with panel protector, pre-attached in the factory, is available to protect against dust and scratches. Clean lines and smooth surfaces also allow easy cleaning and disinfecting.
Arm Mountable VESA Compliance
VESA compliance to be attached to existing mounting accessories.
Customer Assurance with Medical Standards
EIZO monitors meet the strictest medical, safety, and EMC emission standards.
LX300W: Without Stand, without Panel Protector
LX300W-S: With Stand, without Panel Protector
LX300W-P: Without Stand, with Panel Protector
|Size||76 cm / 29.8"|
|Native Resolution||2560 x 1600 (16:10 aspect ratio)|
|Viewable Image Size (H x V)||641.0 x 401.0 mm|
|Pixel Pitch||0.2505 x 0.2505 mm|
10-bit colors (DisplayPort) : 1.07 billion (maximum) colors
8-bit colors: 16.77 million colors
|Viewing Angles (H / V, typical)||170° / 170°|
|Brightness (typical)||750 cd/m2|
|Recommended Brightness for Calibration||400 cd/m2|
|Contrast Ratio (typical)||1100:1|
|Response Time (typical)||20 ms (on / off)|
|Input Terminals||DVI (dual link / single link) x 1, DVI (single link) x 1, HDMI (DVI-signal) x 1, DisplayPort x 1|
|Digital Scanning Frequency (H / V)||
31 - 100 kHz / 29.5 - 61 Hz
Frame synchronous mode: 59.5 - 60.5 Hz
|Function||1 upstream, 2 downstream|
|Power Requirements||AC 100 - 240 V: 50 / 60 Hz|
|Maximum Power Consumption||150 W|
|Power Save Mode||Less than 20 W|
|Power Management||DVI DMPM, DisplayPort 1.1a|
|Features & Functions|
|Digital Uniformity Equalizer||Yes|
|OSD Languages||English, German|
|Net Weight||LX300W-S: 19.5 kg|
|Net Weight (Without Stand)||
LX300W: 15.5 kg
LX300W-P: 18.5 kg
|Hole Spacing (VESA Standard)||200 x 100 mm and 100 x 100 mm, M4, depth 8 - 11 mm|
|Degree of Protection||IP20|
|Certifications & Standards (Please contact EIZO for the latest information.)||CE (Medical Device Directive), IEC/EN60601-1 (2nd edition), IEC/EN60601-1 (3rd edition), CAN/CSA C22.2 No. 601.1-M90, CAN/CSA C22.2 No. 60601-1-08, UL60601-1, FCC-B, C-tick, RCM (from March 1st 2016 latest), RoHS, China RoHS, WEEE, CCC|
|Supplied Accessories (May vary by country. Please contact EIZO for details.)||AC power cord (eu, us, jp, LX300W-S only), dual link signal cable (DVI-D - DVI-D, LX300W-S only), Utility Disk (PDF Instructions for Use)|
- Keep your screen free from dust and fingerprints
- Includes pump spray and cloth
5710 Warland Drive, Cypress, California 90630
(+1) 562 431 5011
(+1) 562 431 4811
Toll free: (800) 800-5202 ext. 220