How to Color Match Your ColorEdge Monitor and Photo Prints

Windows x EPSON x Lightroom 5

Previous Page

How to set your printer

OS Printer Image Software
Windows 7 64bit Epson Stylus Photo R3000 Adobe Lightroom 5

1. Open the Print Module.

Select Print from the menu in the upper right.


2. Color Management Settings

2-1. In the Print Job panel go to Color Management and then click on Profile.



2-2. Select the printer profile from the pull down menu. (ex. SPR3000 Photo Paper Glossy)


* Clicking Profile displays a list of installed profiles.
If a list is not displayed, select Other from the pull down menu and check the box next to the profile.



2-3 Select Relative as your rendering intent.

  relative rendering intent

3. Printer Settings

3-1. Click the Printer button in the print module.



3-2. In the print settings dialog box, select Epson Stylus Photo R3000 from the list of printers and click the Properties button.   



3-3. In the printer properties window select the Main tab. Set the paper you will use under Media Type (ex. Premium Photo Paper Glossy).   


* Under Mode:(J) select Off (No Color Adjustment).    
 If necessary, set the paper size and click the OK button.    


3-4. When you return to the Print dialog box, click OK to begin printing.    


Once you have successfully printed, return to Monitor Adjustment.  Select your desired adjustment software. [Monitor Adjustment]

Using ColorNavigator Color Management Software Using ColorNavigator Elements Photo Color Matching Software

Color Matching Process

  • You can use the above map to return to any section of this guide.