8. SPECIFICATIONS

 

LCD Panel

51 cm (20.1 inch), TFT color LCD panel with Anti-Glare Hard Coating, Viewing Angle: Horizontal: 176°, Vertical: 176° CR ≥ 10

Response Time: approx. 20 ms

Dot Pitch

0.255 mm

Horizontal Scan Frequency

Analog: 24 ~ 94 kHz (Automatic)
Digital: 31 ~ 76 kHz

Vertical Scan Frequency

Analog: 49 ~ 86 Hz (Automatic)(1600 x 1200: 49 ~ 76 Hz)
Digital: 59 ~ 61 Hz, (VGA TEXT: 69 ~ 71 Hz)

Resolution

1600 dots x 1200 lines

Dot Clock (Max.)

Analog: 202.5 MHz
Digital: 162 MHz

Display Colors

16 million colors (max)

Display Area

408 mm (H) x 306 mm (V) (16. 1" (H) x 12" (V))

Power Supply

100-120/200-240 VAC±10%, 50/60 Hz, 0.85/0.5 A

Power Consumption

Max.: 55 W
Power Saving Mode: Less than 2 W (for single signal input without USB)

Input Connector

DVI-I, D-Sub mini 15 pin

Analog Input Signal (Sync)

a) Separate, TTL, Positive/Negative

b) Composite, TTL, Positive/Negative

Analog Input Signal (Video)

0.7 Vp-p / 75 Ω Positive

Input Signal (Digital)

TMDS (Single Link)

Signal registration

Analog: 45 (Factory preset: 27)
Digital: 10 (Factory preset: 0)

Plug & Play

VESA DDC 2B

Dimensions

443 mm (W) x 446~ 528 mm (H) x 208.5 mm (D)
(17.4"(W) x 17.6" ~ 20.8" (H) x 8.2"(D))

Dimensions (without stand)

443 mm (W) x 347 mm (H) x 69 mm (D)
(17.4"(W) x 13.7"(H) x 2.72"(D))

Weight

9.2 kg (20.3 lbs.)

Weight (without stand)

6.2 kg (13.7 lbs.)

Temperature

Operating: 0°C ~ 35°C (32°F ~ 95°F)
Storage: -20°C ~ 60°C (-4°F ~ 140°F)
Humidity 30% to 80% R.H. Non-condensing

USB standard

USB Spefcification Revision 2.0 complied self-powered hub

USB port

Upstream port x 1

Image Formation Time*1 Max: 66 ms

*1 Test result according to the ISO 13406-2 standard from a certifiled testing laboratory.

Default settings

 

 

Analog input

Digital input

Brightness

100%

100%

Smoothing

3

FineContrast Mode

Custom

PowerManager

VESA DPMS

DVI DMPM

Screen Size

Full

Input Priority

1

Off Timer

Disable

Menu Settings

Menu Size: Normal, Menu Off Timer: 45 seconds

Beep

On

Language

English

Beeper settings

Short beep

ScreenManager item selected.

ScreenManager parameter adjusted to minimum or maximum limit.

Input Signal Selection Button pressed.

Long beep

Auto Adjustment Button pressed.

ScreenManager data-save executed.

4 short beeps

Monitor not connected correctly.

PC turned off.

Monitor received unsupported signal frequency.

2 short beeps every 15 sec.

Monitor is in the advance notice mode of the Off Timer.
The power will be off within fifteen minutes.

Dimensions

 

Pin Assignment

DVI-I Connector

 

 

Pin No.

Signal

 

Signal

Pin No.

Signal

1

TMDS Data2-

11

TMDS Data1/3 Shield

21

NC

2

TMDS Data2+

12

NC

22

TMDS Clock shield

3

TMDS Data2/4 Shield

13

NC

23

TMDS Clock+

4

NC*

14

+5V Power

24

TMDS Clock-

5

NC

15

Ground (return for +5V, Hsync and Vsync)

C1

Analog Red

6

DDC Clock (SCL)

16

Hot Plug Detect

C2

Analog Green

7

DDC Data (SDA)

17

TMDS Data0-

C3

Analog Blue

8

Analog Vertical Sync

18

TMDS Data0+

C4

Analog Horizontal Sync

9

TMDS Data1-

19

TMDS Data0/5 Shield

C5

Analog Ground
(analog R, G, & B return)

10

TMDS Data1+

20

NC

 

 

 

 

 

(*NC: No Connection)

D-Sub mini 15 pin connector

 

 

Pin No.

Signal

Pin No.

Signal

Pin No.

Signal

1

Red video

6

Red ground

11

Ground Shorted

2

Green video

7

Green ground

12

Data (SDA)

3

Blue video

8

Blue ground

13

H. Sync

4

Ground

9

No pin

14

V. Sync

5

No pin

10

Ground Shorted

15

Clock (SCL)

USB Port

 

No.

Signal

Signal

1

VCC

Cable power

2

- Data

Serial Data

3

+ Data

Serial Data

4

Ground

Cable Ground