
|

|
|
ScreenManager allows you to adjust screen performance though the
main menu and select a FineContrast mode easily.
|
|
|
|
|
|
 |
|
Main Menu and FineContrast menu cannot be activated at the same time. |
|
|
1.
|
Entering the ScreenManager
Press the Enter button once to display the main menu of the ScreenManager.
|
|
2.
|
Making Adjustments and Settings
(1)
|
Select the desired sub menu icon using the Control buttons and press the Enter button. The sub menu appears. |
(2)
|
Use the Control buttons to select the desired setting icon and press the Enter button. The setting menu appears. |
(3)
|
Use the Control buttons to make all required adjustments and press the Enter button to save the settings. |
|
|
3.
|
Exiting the ScreenManager
(1)
|
To return to the main menu, select the <Return> icon or press the Down button twice, followed by the Enter button. |
(2)
|
To exit the ScreenManager, select <Exit> icon or press the Down button twice, followed by the Enter button. |
|
|
|
 |
|
Double clicking the Enter button at any time also exits the ScreenManager menu. |
|
|
|
FineContrast menu
Directly pressing the Left or Right button allows you to select the best suited mode for screen display from 3 FineContrast modes; sRGB, Custom and CAL. To exit the menu, press the Enter button. |
|
|
|
|
The following table shows all the ScreenManager's adjustment and setting menus."*" indicates adjustments of analog input only and "**" indicates digital input only.
|
|
|
Main menu
|
Sub menu
|
Reference
|
Screen |
Clock
|
* |
4-1. Screen Adjustment |
Phase
|
* |
Position
|
* |
Resolution |
* |
Range Adjustment
|
* |
Smoothing
|
|
Signal Filter
|
* |
Color(Custom)*1 |
Brightness
|
|
4-3. Color Adjustment |
Temperature
|
|
Gamma
|
|
Saturation
|
|
Hue
|
|
Gain
|
|
6 Colors
|
|
Reset
|
|
PowerManager |
DVI DMPM
|
|
4-4. Power-save Setup |
VESA DPMS |
|
Off |
|
Others |
Screen Size
|
** |
4-2.Displaying a low resolutions |
Border Intensity
|
* |
Input Priority
|
|
Select the priority input signal. |
Off Timer
|
|
Set the monitor's off timer to on or off. |
Beep
|
|
Set the monitor's beeper to on or off. |
Menu Settings
|
Menu Size |
|
Change the size of the menu. |
Menu Position |
|
Adjust the menu position. |
Menu Off Timer |
|
Set the menu displaying time.*2 |
Translucent |
|
Set the transparency of the background. |
ActiveRotation II |
|
5.ActiveRotation II |
Power Indicator |
|
Make non-light for blue lighting when the screen is displayed (see "Power Indicator setting"). |
Reset |
|
Return to the factory default settings. |
Information |
Information |
|
Review the ScreenManager's settings, model name, serial number and usage time.*3 |
Language |
English, German, French, Spanish, Italian, Swedish and
Japanese |
|
Select the ScreenManager's language. |
*1
|
The adjustable functions on the <Color> menu depend on the selected FineContrast mode. The above table shows the sub menus when the "Custom" mode is selected (see "4-3. Color Adjustment"). |
*2
|
The displaying time of the FineContrast menu cannot be changed. |
*3
|
Due to the inspection on the factory, the usage time may not "0 hour" at shipping. |
|
|

|
|
This function allows you
to select the best suited mode for screen display.
|
|
|
 |
 |
To select the Mode
|
Directly pressing the Left or Right button allows you to select the best suited mode for screen display from 3 FineContrast modes; sRGB, Custom and CAL. Color settings each mode can be adjusted by using the <Color> menu of the ScreenManager.
|
|
|
 |
Exit
|
Press the Enter button to exit the menu.
|
|
|
 |
FineContrast Mode
|
Selectable FineContrast
modes are as follows.
sRGB |
To display the screen images based on those original colors (ex. over the Internet). |
Custom |
To adjust the color settings according to your preference. |
CAL |
The mode only for calibration software |
|
|
|
 |
 |
Color Adjustment of the Mode Settings
|
<Brightness>, <Temperature> and <Gamma> settings can be adjusted on the FineContrast menu. Select the desired function icon with the Up/Down Control buttons and adjust with the Left/Right Control buttons. (Setting(s) of <Temperature> and/or <Gamma> is defined as standard default in some modes.
|
|
|
 |
Detailed Adjustments
|
The detailed color settings of each mode can be adjusted by using the <Color> menu of the ScreenManager.
|
|
|
 |
|
"CAL" mode can be adjusted only by Calibration Software "ColorNavigator". |
|
|

|
|
 |
 |
Adjustment Lock
|
Use the "Adjustment Lock" function to prevent any accidental changes.
Locked function |
- Settings in the ScreenManager
- Auto Adjustment Button
|
Unlocked
function |
- Selecting of the FineContrast mode by the Right or Left buttons, / Adjustments
- <Brightness> setting by the Up or Down buttons.
- Input Signal Selection Button
- Power Button
|
[To lock]
Switch off the monitor's power by the power button on the front control panel. Press on the Auto Adjustment button while switching on the monitor's power.
[To unlock]
Switch off the monitor's power by the power button on the front control panel, then hold Down the Auto Adjustment button once again and turn the power back on.
|
|
|
The off timer function causes the monitor to automatically enter a power off state after a predetermined amount of time has lapsed. This function was created to reduce afterimage characteristics that are particular to LCD monitors when the monitor screen is left on for a long period without use.
[Procedure]
(1)
|
Select <Off Timer> in the ScreenManager <Others> menu. |
(2)
|
Select "Enable" and press the Right and Left buttons to adjust the "On Period" (1 to 23 hours). |
[Off Timer System]
PC
|
Monitor
|
Power Indicator
|
On Period (1H - 23H) |
Operation |
Blue |
Last 15 min. in "On period" |
Advance Notice *1 |
Blue Flashing |
"On period" expired |
Power off |
Flashing yellow slowly |
*1
|
Advance notice (Power Indicator flashing blue) will be given 15 minutes before the monitor automatically enters the "Power Off" mode.
Pressing the power button during the advanced notice period can reset "On Period" for another 90 minutes. It is possible to reset "On Period" as many times as needed. |
[Power Resumption Procedure]
Press the power button to return a normal screen.
|
|
|
 |
|
The off timer function works while the PowerManager is active, but there is no advance notice before the monitor's power is switched off. |
|
|
|
Light off the power indicator. This function is available for the multiple panels settings.
[Procedure]
(1)
|
Select <Power Indicator> in the ScreenManager <Others> menu. |
(2)
|
Select "Disable". |
|
|
|
 |
 |
EIZO Logo Appearing Function
|
When switching on the power button on the front control panel, the EIZO logo is displayed for a while. If you desire to display or undisplay this logo, use this function. (Default is logo appearing.)
[To undisplay]
Switch off the monitor's power by the power button, then hold Down the Enter button once again and turn the power back on.
[To display]
Switch off the monitor's power by the power button, then hold Down the Enter button once again and turn the power back on.
|
|