SMD 19102
1MP 48cm (19") MONOCHROME LCD MONITOR
This one megapixel monochrome monitor accepts a wide range of current and legacy video, digital and RGB inputs. Its high brightness and contrast, combined with a cost effective design, create the perfect fit for many grayscale modalities and imaging environments.
  • Contact EIZO
  • SMD 19102
  • SMD 19102
  • expand
  • 360°View
  • SMD 19102
    • RadiForce SMD 19102
    • compare
2 items
  • Features
  • Spec
  • Document
  • Graphics Board
  • Accessory

Diagnostic Precision with DICOM Part 14 Factory Adjustment

To ensure the most accurate and consistent shadings possible, EIZO carefully measures and sets every grayscale tones on the production line to produce a monitor compliant with DICOM Part 14.

Consistency with DICOM Part 14 Calibration

Calibration compliant with DICOM Part 14 to ensure the most accurate and consistent shadings possible over time.

Mode Selection for Optimum Viewing

Selectable with the front panel buttons, the CAL Switch function allows for various imaging modes of different modalities such as CR, CT, and endoscope images. Furthermore, auto mode settings can be made with the Auto CAL Switch function.

Quick Brightness Stabilization for Instant Viewing

At startup or upon wakeup, the EIZO patented drift correction function quickly stabilizes the brightness level. In addition, a sensor measures the backlight brightness and compensates for brightness fluctuations caused by the ambient temperature and the passage of time.

Wide Viewing Angles

Wide Viewing angles with minimal color shift when viewed from the side.

Wide Range of Input Support

Multiple input signal support, including DVI-I, BNC, D-Sub mini 15 pin, and S-Video, allows for connecting with any legacy or state-of-the-art modality

BNC DVI-I

Last Image Hold

SMD 19102 DL with a Last Image Hold (LIH) function is specially designed for connecting to legacy radiography systems that do not have an LIH function. The function reduces radiation exposure for patients and radiologists.

Versatile Positioning for Improved Operability and Less Fatigue

EIZO's highly versatile stand offers tilt, swivel, portrait rotation, and a wide height adjustment range enabling you to use the monitor with greater comfort.

Customer Assurance with Medical Standards

Meets the strictest medical, safety, and EMC emission standards.

ISO 13485 Certification

Acquiring ISO 13485 certification demonstrates EIZO's ability to consistently meet customer requirements for our products and services.

Warranty with Safety and Trust

EIZO and its authorized distributors offer a five-year limited warranty.

Model Variations SMD 19102 D: With Stand
SMD 19102 DL: With Stand, with Last Image Hold function
SMD 19102 C: Without Stand
SMD 19102 CP: Without Stand, with Panel Protector
Cabinet Color Anthracite Gray
Panel  
Type
TFT Monochrome LCD Panel (IPS)
Size
48 cm / 19" (481 mm diagonal)
Native Resolution
1280 × 1024
Display Size (H x V)
376.0 × 301.0 mm
Pixel Pitch
0.294 × 0.294 mm
Grayscale Tones
256 tones
Viewing Angles (H / V, typical)
170°, 170°
Brightness (typical)
1,000 cd/m2
Recommended Brightness for Calibration
400 cd/m2
Contrast Ratio (typical)
900:1
Response Time (typical)
25 ms (On/Off)
Video Signals  
Input Terminals
DVI-I x 1, D-Sub mini 15 pin x 1, BNC x 4, S-Video x 1
Output Terminals (Loop Through)
BNC (SoG) x 1
Digital Scanning Frequency (H / V)
31 - 100 kHz, 48 - 85 Hz
Analog Scanning Frequency (H / V)
24 - 100 kHz, 50 -100 Hz
Sync Formats
Separate, Composite, Sync-on-Green
Power  
Power Requirements
AC 100 - 120 V, 200 - 240 V: 50 / 60 Hz
Maximum Power Consumption
58 W
Typical Power Consumption
26 W
Power Save Mode
Less than 8 W
Power Management
Digital: DVI DMPM, Analog: VESA DPM
Sensor Backlight Sensor
Features & Functions  
Brightness Stabilization
Yes
OSD Languages
English, German
Physical Specifications  
Net Weight
SMD 19102 D, SMD 19102 DL: 10.7 kg
SMD 19102 C: 6.4 kg
SMD 19102 CP: 7 kg
Hole Spacing (VESA Standard)
100 x 100 mm
Environmental Requirements  
Degree of Protection
SMD 19102 D, SMD 19102 DL, SMD 19102 C: IP20
SMD 19102 CP: IP22 for front, IP20
Certifications & Standards (Please contact the EIZO subsidiary or distributor in your country for the latest information.) CE (Medical Device Directive), EN60601-1, UL60601-1, CSA C22.2 No. 601-1, FCC-A, RoHS, China RoHS, WEEE, CCC, GOST-R
Supplied Accessories AC power cord, signal cable (DVI-D ~ DVI-D), Utility Disk (user's manual)
Warranty Five Years
Dimension Drawing GIF
Brochures
RadiForce G&R-Series
6.97MB
 
RadiForce L&E-Series
4.61MB
 
SMD 19102
625KB
Manuals

Please note that you must be a registered user to download RadiForce relevant files. If you have not registered, please continue on to our registration page. If you have forgotten your User ID or Password, please send us an e-mail.

Languages
Document Language Size Download
SMD 19102 (English) English 2.24MB Download
ScreenSlicer Ver.1.1.0 Software manual (English) English 3.41MB Download
SMD 19102 (German) German 4.99MB Download
Graphics Boards
Xenia Pro

- PCI-Express x16

Graphics Boards
Xenia

- PCI-Express x16

Graphics Boards
RAD LPX-PCI

- PCI

Recommended
Graphics Boards
MED-V5800

- PCI-Express x16

Graphics Boards
MED-V4800

- PCI-Express x16

Recommended
Graphics Boards
MED-V3800

- PCI-Express x16

Recommended
Graphics Boards
MED-Q5120

- PCI-Express x16

Graphics Boards
FirePro 2270 R (x1)

- PCI-Express x1

Recommended
Graphics Boards
FirePro 2270 R

- PCI-Express x16

Recommended
QC Software & Tools
RadiCS

- Quality Control Software

QC Software & Tools
UX1 Sensor

- Quality Control Tool
- External Sensor

Arm
LA-030-W

- Wall Mount Arm
- 3-Axes

Arm
LA-011-W

- Wall Mount Arm
- 1-Axes

Stand
LS-HM1-D

- Dual Height Adjustable Stand
- For 17 – 21.3" monitors

Page Top
  • Eizo Library
  • Case Studies
  • Videos
  • Award&Reviews
prev next