RadiForce LX470W
47"WIDE 119cm (47") COLOR LCD MONITOR
This 2 MP widescreen monitor is ideally suited for viewing DICOM X-ray images or serving as a repeater monitor in surgical environments. A wide range of input and output signals, the combining of pictures, and pre-calibrated gamma models permit tailoring the monitor to multiple specialties. The fanless design and the waterproof, easy-to-clean front panel enable usage in sterile hospital environments.
  • Contact EIZO
  • RadiForce LX470W
  • RadiForce LX470W
  • expand
  • 360°View
  • RadiForce LX470W
2 items
  • Features
  • Spec
  • Document
  • Graphics Board

Wide Viewing Angles for Multiple People Use

Thanks to the wide viewing angles, images can be viewed simultaneously by several people with the highest quality reproduction and minimal color shift.

Quick Brightness Stabilization for Instant Viewing

EIZO's fully automated stability function makes use of an internal backlight sensor to quickly stabilize the brightness level at startup and to compensate for fluctuations caused by variations in ambient temperature and the passage of time.

Diagnostic Precision with Factory Adjustment

To ensure the most accurate and consistent shadings possible, EIZO carefully measures and sets every grayscale tone on the production line to offer monitors fully compliant with DICOM Part 14.

Consistency with DICOM Part 14 Calibration

RadiForce monitors are calibrated to comply with DICOM Part 14 to offer rendering consistency over time.

Consistency with DICOM Part 14 Calibration

Full High-Definition

With a native resolution of 1920 x 1080, the monitor can display original, full HD images in 1920 x 1080 resolution without blurring or distortion.

Full High-Definition

Colors to Fit the Physician's Preference

The color, hue, saturation, brightness, contrast, temperature and tones of the display can be adjusted to best fit the physician's color preference.

Colors to Fit the Physician's Preference

Wide Range of Input and Output Support

EIZO offers multiple input signals to allow connections with both legacy and state-of-the-art endoscopic systems without the need of other optional devices or costs. With loop-through output support, the monitors are also ideally suited for multi-monitor integration or archiving in the operating room.

Dual Picture Viewing Modes

With Picture-in-Picture (PiP), Picture-and-Picture (PaP), and Picture-over-Picture (PoP) functions, archived images or patient data can be reviewed simultaneously during an operation.

Fanless Silent Design

Engineered to dissipate heat without a fan, thus keeping distracting noises and circulation of dust and germs out of the operating room while ensuring the controlled laminar airflow remains undisturbed within the room.

LCD Panel Protector for Easy Cleaning

The panel protector secures the screens from scratches, damages and liquids and alleviates cleaning and disinfection of the front surface.

Arm Mountable VESA Compliance

VESA compliance to be attached to existing mounting accessories.

Customer Assurance with Medical Standards

RadiForce monitors meet the strictest medical, safety, and EMC emission standards.

Cabinet Color Black, White
Panel  
Type
TFT Color LCD Panel (IPS)
Size
119 cm / 47" (1,193 mm diagonal)
Native Resolution
1920 x 1080 (16:9 aspect ratio)
Display Size (H x V)
1039.7 x 584.8 mm
Pixel Pitch
0.5415 x 0.5415 mm
Display Colors
16.77 million colors
Viewing Angles (H / V, typical)
178°, 178°
Brightness (typical)
700 cd/m2
Contrast Ratio (typical)
1000:1
Response Time (typical)
9 ms (Midtone)
Video Signals  
Input Terminals
BNC (HD-SDI) x 1, BNC (Composite) x 1, DVI-I x 1, HDMI x 1, D-Sub mini 15 pin (Separate Sync, Composite Sync, SoG*,YPbPr*, RGBS*, RGB/HV*) x 1, S-Video x 1
Output Terminals (Loop Through)
BNC (HD-SDI, Composite) x 2, D-Sub mini 15 pin (VGA) x 1, S-Video x 1
Digital Scanning Frequency (H / V)
15 - 100 kHz, 50 - 85 Hz
Analog Scanning Frequency (H / V)
15 - 100 kHz, 50 - 85 Hz
USB  
Function
1 upstream, 2 downstream
Standard
Rev. 2.0
Power  
Power Requirements
AC 100 - 120 V, 200 - 240 V: 50 / 60 Hz
Maximum Power Consumption
270 W
Power Save Mode
Less than 14W
Power Management
Digital: DVI DMPM,
Analog: VESA DPM
Sensor Backlight Sensor
Features & Functions  
OSD Languages
English, German
Physical Specifications  
Net Weight
40 kg
Net Weight (Without Stand)
40 kg
Hole Spacing (VESA Standard)
400 x 200 mm
Environmental Requirements  
Degree of Protection
IP54 for front, IP20
Certifications & Standards (Please contact the EIZO subsidiary or distributor in your country for the latest information.) CE (Medical Device Directive), EN60601-1, UL60601-1, CSA C22.2 No. 601-1, FCC-A, C-Tick, RoHS, China RoHS, WEEE
Supplied Accessories AC power cord, signal cable (DVI-D ~ DVI-D), remote control, Utility Disk (user's manual)
Warranty Three Years
Dimension Drawing GIF
Brochures
RadiForce L&E-Series
4.61MB
Manuals

Please note that you must be a registered user to download RadiForce relevant files. If you have not registered, please continue on to our registration page. If you have forgotten your User ID or Password, please send us an e-mail.

Languages
Document Language Size Download
ScreenSlicer Ver.1.1.0 Software manual (English) English 3.41MB Download
LX470W User's manual English 1.56MB Download
QC Software & Tools
RadiCS

- Quality Control Software

QC Software & Tools
UX1 Sensor

- Quality Control Tool
- External Sensor

Stand
FST4700
FST4700

Mounting Bracket
FWM6300
FWM6300

- Wall Mount

Page Top
  • Eizo Library
  • Case Studies
  • Videos
  • Award&Reviews
prev next