- Awards & Reviews
New Ergonomic Design
The Raptor SQ2804 comes with all the features and functionality of its predecessor in a new lighter and more compact design. Addressing the trend towards open controller positions, EIZO has reduced the monitor’s weight, minimizing stress on mounting arms. The monitor’s ergonomically designed stand also offers tilt and swivel capability.
Lower Power Consumption and Heat Generation
The Raptor SQ2804 employs EIZO eBlue LED backlight technology, consuming just 100 watts at its maximum brightness of 350 cd/m2 and only 50 watts in typical operating conditions of ATC control centers. These low power requirements reduce heat generation within closed consoles; a leading cause of product failure. In addition, the EIZO eBlue LED backlight has a lifetime of more than 100,000 hours for at least 11 years of continuous operation.
The EIZO eBlue LED backlight provides superior brightness uniformity across the screen and significantly less color shift over the life of the monitor; attributes typically difficult to achieve with large-screen displays.
An integrated automatic backlight stabilizer allows the controller to set the backlight brightness and ensure it remains constant throughout the life of the backlight trays. Should the backlight trays need replacing, they can be easily swapped out on site in just 5 minutes.
Multiple Input Connectors
Two dual-link digital video signal inputs are included as standard and a DisplayPort input is available as an option. Additionally, single or dual analog video signal inputs are available as needed to maintain the monitor as a drop-in replacement for the Sony DDM CRT. The monitor also has multiple communication interfaces, including dual USB used for remote controlling functions such as signal switching between two systems as well as for monitor maintenance purposes.
EIZO designed the Raptor SQ2804 to be customizable depending on individual control center requirements. Customization may include, but is not limited to, cabinet color, fan-less solutions, DisplayPort input, multiple video signal interfaces, inclusion of secondary power supplies, multiple protection/reflection glasses, and communication interfaces. The Raptor SQ2804 is also available in desktop, VESA-mount, panel-mount, and chassis versions.
Detailed Screen Adjustments
An abundance of on-screen display functions simplify adjusting the screen as well as provide extensive color control. Frequently-used functions such as brightness and contrast can be adjusted via a quick-access OSD menu. Other adjustments offered in the more detailed OSD menu include gamma, color temperature, sharpness, image position, and backlight control. Additionally, all controls are easily accessed remotely if required.
Brightness and Color Temperature Calibration
Any monitor’s color temperature and brightness is susceptible to gradual changes over time. To ensure image consistency, the Raptor SQ2804 comes equipped with EIZO’s hardware calibration functionality built directly into the monitor’s firmware. By using an external sensor, the monitor can be easily adjusted to the desired state through the OSD interface without the need for any additional software, ensuring no intrusion on the workstation.
Multiple Resolution Support
The Raptor SQ2804 supports resolutions from 640 × 480 up to its native resolution of 2048 × 2048. This is helpful when receiving other non-native resolutions as is typically necessary for setup. It also means a smaller auxiliary monitor is not necessary to view boot data or failure data.
|Size||28.05" / 71.0 cm (712 mm diagonal)|
|Native Resolution||2048 x 2048 (1:1 aspect ratio)|
|Display Size (H x V)||503.808 x 503.808 mm|
|Pixel Pitch||0.246 x 0.246 mm|
|Grayscale Tones||256 tones|
|Display Colors||16.7 million|
|Viewing Angles (H / V, typical)||170°, 170°|
350 cd/m2 (maximum)
less than 10 cd/m2 (minimum)
|Contrast Ratio (typical)||1000:1|
|Response Time (typical)||25 ms|
DVI-I 29 pin x 2
5-BNC x 2 (Optional)
|Analog Scanning Frequency (H / V)||30 - 130 kHz, 50 - 70 Hz|
|Sync Formats||Separate Sync 1-5 Vss (75 Ω)|
|Power Requirements||AC 90 - 264 V, 47 - 63 Hz|
|Maximum Power Consumption||100 W (Brightness: 350 cd/m2)|
|Typical Power Consumption||50 W (Brightness: 70 cd/m2)|
|Standby Mode||5 W|
|Features & Functions|
|OSD Languages||English, German, Spanish, French|
|Others||RS232 interface, RS422 interface, Auto Adjustment (Frequency / Phase (analog only)), TCP/IP Interface, External Keyboard Interface|
|Communication Protocol||RS232-1 / RS232-2, RS422, USB-1 / USB-2, TCP/IP|
|Dimensions (Landscape, W x H x D)||623 x 659 x 323 mm|
|Dimensions (Without Stand, W x H x D)||623 x 623 x 122 mm|
|Net Weight||35.0 kg / 77.2 lbs|
|Dimensions (Panel Mount, W x H x D)||644 x 644 x 124 mm|
|Dimensions (Chassis, W x H x D)||613 x 613 x 121 mm|
|Net Weight (Without Stand)||30 kg / 66.1 lbs|
|Net Weight (Panel Mount)||27.0kg / 59.5 lbs|
|Net Weight (Chassis)||25.0kg / 55.1 lbs|
|Operating Temperature||0 - 40 °C|
|Operating Humidity (R.H., non condensing)||max. 95% (no condensation)|
|Storage Temperature||-25 - 60 °C|
|Certifications & Standards (Please contact the EIZO group company or distributor in your country for the latest information.)||CE, UL, c-UL, FCC, RoHS, WEEE|