|
|
 |
|
|
| |
 |
Operation of the EIZO LCD monitor when using ADC-DVI conversion adaptor |
|
Macintosh's ADC connector and EIZO monitors can be displayed with a digital signal by using the following ADC-DVI conversion adaptors and standard digital cable (DVI-DVI).
Note: Please note that this information does not guarantee picture quality. Additionally, resolution setting in some graphics boards might be limited.
1. Type of ADC-DVI conversion adaptors
| (1) Adaptor which converts ADC into DVI |
|
|
| |
| (2) Adaptor which converts ADC into DVI and has a built-in digital signal detection function |
|
|
2. Compatibility Table
Compatibility with ADC-DVI conversion adaptors
| Monitors |
Equipped
with digital connector |
ADC-DVI
adaptor |
ADC-DVI
adaptor with built-in digital signal direction function |
| FlexScan
L365, L465, L665 |
DVI-D |
Yes |
Yes |
| FlexScan
L565 |
DVI-D |
No1 |
Yes |
| FlexScan
L367, L557, L767 |
DVI-D |
Yes |
Yes |
| FlexScan
L375, L685, L685EX, L985EX, L695 |
DVI-I |
No |
Yes |
| ColorEdge
CG21, CG18 |
DVI-I |
Yes2
(ADC setting is required)
|
Yes |
|
1 L565 does not display ADC signal due to circuitry restrictions.
2 Change setup information to "ADC" by using the menu that appears when [Power switch] and [SIGNAL 1-2] buttons are pressed at the same time.
|
|
|
|
|
